Is there such a thing as a “T” connector. I had a break in two parallel pvc pipes that came into a T joint. The break was also at the top of the “T”. Is there a T connector that would connect the two parallel pvc pipes and also allow me to run a pvc pipe up from the T? PVC pipe is one inch. Many, many thanks for any help that you can give.
They make a slipjoint repair coulping that slides on pipe and have to tighten up the nuts on each end, so get 1 or2 of them and a tee and some glue and put in new tee where you want it. may be you can do it with one coupling. Let me know.