- This topic has 1 reply, 2 voices, and was last updated 22 years ago by
.
-
Posts
-
-
A G.E. dishwasher in one unit is growing mold on the inside starting in the sump area. I had to replace the first d/w because the mold was so bad. Now this second d/w is doing the same thing. Originally i thought that because the water heater was only set at 115 that it wasn’t killing the mold. When I first replaced the d/w I turned up the water heater and thought that would take care of the problem. (guess i was wrong about that.) Both dishwashers are mechanically in good working order with strong wash cycles and the element working properly. In additon the d/w is run on a daily basis and all extra food is removed from the dishes before they are placed in the d/w. I measured the water temp. and found that it maxed out at 120. I take care of 700 apts. and townhomes and have never seen a problem like this. This d/w grows enough mold to choke a small elephant. Any insight to this would be greatly appreciated. Thanks!!!
-
-
- You must be logged in to reply to this topic.
