- This topic has 1 reply, 2 voices, and was last updated 19 years, 12 months ago by
DUNBAR.
Viewing 1 reply thread
-
Posts
-
-
MasterPlumbers
hello ,
i need to remove two steam radiators for new kitchen and pantry vinyl flooring to be laid … i have a one pipe steam system with cast iron radiators … removing seems pretty straight forward but i was wondering if anyone had any tips on things to watch out for …
they are both the short thin type , one is 3 foot long , 2 foot high , and the other is half as long … they are both about 4 inches wide …
when they are reattached is there anything special that needs to be done ? do i need some sort of sealer or need to use specific torque ?
thanx for any help …
… -
Use thread sealant along with teflon tape on all threaded connections and tighten them enough so that they don’t leak.
“Your best interest is secured by making the right decisions the first time.”
-
Viewing 1 reply thread
- You must be logged in to reply to this topic.
