Can anyone convert a pipe measurement & type?

Home Forums Public Forums General Plumbing Can anyone convert a pipe measurement & type?

Viewing 1 reply thread
  • Author
    • #277136

      I am looking at some drawings of an appartus with a port measurement of 200 NB with a pipe type of 200 NB 10.
      Could anyone tell me what 200 NB is in mm and what
      200 NB 10 is as a grade?

    • #295508

      NB is nominal bore. The inside diameter of the pipe. Would have thought the 10 was the wall thickness.

      So its a 200mm internal bore pipe with 10mm thick walls, full OD would be 220mm


      All advice is given with-out seeing the job, and hence all advice MUST be taken as advice with limited knowledge on the exact situation. NO responsibility can or will be taken. And yes, I am a licensed Plumber and Drainer with my own business in Brisbane Australia.
      Try visiting ….
      Macadamia nuts and Aussie productsProstate cancer kills 2600 per/year in AustraliaEcommerce books

Viewing 1 reply thread
  • You must be logged in to reply to this topic.

Pin It on Pinterest

Share This