Standard 1.6 gal toilet

Home › Forums › Public Forums › General Plumbing › Standard 1.6 gal toilet

Viewing 1 reply thread
  • Author
    Posts
    • 8 Jul 2003 at 12:38 pm #276747
      Avatar photoStuart W Bazley
      Member

      I have a Standard 1.6 gal toilet from 1994. Can I replace the inside of the tank to make it a 5 gal flush? Now I have a plastic bucket around the drain in the tank. Inside the bucket is the flapper which lifts up. Can this be replaced with a normal flapper and the plstic bucket removed? Any help will be greatly appreciated. I have 3 of the toilets and non flush very good.

    • 8 Jul 2003 at 10:58 pm #294713
      Avatar photoRetired plbg1
      Participant

      Sounds like you have one of those pressure toilets, I dont think tank is big enough to hold 5 Gal. water. Check with the Manufacture.

  • Author
    Posts
Viewing 1 reply thread
  • You must be logged in to reply to this topic.