Hot water stopped completely

Home Forums Public Forums General Plumbing Hot water stopped completely

Viewing 1 reply thread
  • Author
    • #276358

      I have a delta shower mix valve that has been working for 10 years but suddenly there is absolutely no flow of hot water. I’ve cycled the stops on the hot water side with the ball attached to handle removed but still no luck. Would the mix valve be the only culprit or could it be something prior to valve? Can the mixer valve be replaced without soldering?

    • #293994

      You could shut off the water ,take the faucet apart,turn the water back on and feel the water to see if hot is coming through.Be best if you had some help to do this.If hot is coming through,you know that something in the faucet is restricting the flow and most likely the faucet needs repaired.If hot isn’t coming through,you got a problem in the hot supply,maybe a plugged line or valve closed,check other fixtures to see if they have hot water.DONT TURN THE WATER ON ALL THE WAY TO TEST FOR FLOW,JUST ENOUGH TO HEAR WATER RUNNING IN THE PIPE AND NOT VERY LONG.

      » This message has been edited by racefanone on 15 February 2003

Viewing 1 reply thread
  • You must be logged in to reply to this topic.

Pin It on Pinterest

Share This