- This topic has 1 reply, 2 voices, and was last updated 24 years, 2 months ago by
bungie.
-
Posts
-
-
MasterPlumbers
I recently changed my temperature pressure relief valve and now my hot water does not stay hot for very long. My hot water setting is on the highest setting also. Before I installed the valve I didnt have a problem with my water temperature. It only stays hot for about one good bath then it gets cold…please help thank you.
-
the temperature pressure relief valve only releases when the temp or pressure gets to high. It has no function that controls the heat.
either
1/ the element is faulty
2/ the thermostat is faultyEither realy needs a electrition to look at it properly.
But “one good bath” usually is about all you’ll get from anything under 140ltr tank
DISCLAIMERAll advice is given with-out seeing the job, and hence all advice MUST be taken as advice with limited knowledge on the exact situation. NO responsibility can or
will be taken. And yes, I am a licensed plumber with my own business in Brisbane Australia
-
- You must be logged in to reply to this topic.
