- This topic has 4 replies, 4 voices, and was last updated 21 years, 10 months ago by
Bruce T.
-
Posts
-
-
peter murphy
I have a jet pump system with a Myers pump and a fairley new tank with a diaphram. Also the pressure switch was purchased at the same time as the tank.
The problem is that after about 15 minutes, the pressure drops off to nothing.The pump comes on shortly after turning on the water.
What could be the problem. What is the best way to check the switch’s settings and what should they be? Thanks for any and all advice. -
In reply to message posted by jlkowerysr:
I have a jet pump system with a Myers pump and a fairley new tank with a diaphram. Also the pressure switch was purchased at the same time as the tank.
The problem is that after about 15 minutes, the pressure drops off to nothing.The pump comes on shortly after turning on the water.
What could be the problem. What is the best way to check the switch’s settings and what should they be? Thanks for any and all advice.
Send me a private E mail and I will give you some suggestions as BIG BROTHER is watching and I cant explain it here sorry
-
foot valve/spring check failure????
BIG BROTHER.
(just kidding Sylvan!)
-
try checking your check valve
-
dont listen to him, try checking your spring-check !
LOL!
-
- You must be logged in to reply to this topic.
