- This topic has 1 reply, 2 voices, and was last updated 23 years ago by
Tony.
Viewing 1 reply thread
-
Posts
-
-
Allan Docherty
I just bought a new washing machine for my condo. The problem is that the drain is now overflowing. I tried snaking it and blasting it with a gardin hose, but that did not work. The drain is not blocked, it will drain, but it drains slow. If you put the hose in and turn the water on full, it takes a minute then it backs up, but if you turn the water down for a second it will drain. The washer seems like it is draining too fast for the pipes to handle. Or the pipes are partially blocked somewhere down the line.
Do you have any advise you can give me for what I can try next? -
try to extend the riser pipe , todays washers have powerful pumps which a low drain line can not handle
-
Viewing 1 reply thread
- You must be logged in to reply to this topic.
