water line

Home Forums Public Forums General Plumbing water line

Viewing 1 reply thread
  • Author
    • #274777
      Avatar photoMasterPlumbers

        We recently replaced the flap in our toilet to stop a leak. Now the water no longer fills to the water line and we are unable to get enough pressure to completely empty the bowl upon flushing. What’s next?

      • #290441
        Avatar photofourth year

          If you are referring to the water level in the bowl, then your tank is filling too quickly and not giving the refill tube sufficient time to replace the water in the bowl. Sometimes reducing the flow rate by partially closing the inlet valve will help that. If this is the problem, you have always had it, but the leaking flapper compensated for it by filling the bowl after the fill valve shut off. If you mean the water level in the tank does not come up to the proper level, changing the flapper had no affect on it and you have a different problem with the fill valve.

      Viewing 1 reply thread
      • You must be logged in to reply to this topic.

      Pin It on Pinterest

      Share This