submersible well pump

Home › Forums › Archives › Old Bulletin Board Archives › submersible well pump

Viewing 1 reply thread
  • Author
    Posts
    • #283167
      Avatar photoJohn Hollins
      Member

      the galvanized pipe broke off at the threads flush with the top of the pump casing. at the same time the electrical wires to the pump were immediately pulled downward until the electrical box hit the top of the pump casing plate. do i need a new pump?

    • #308897
      Avatar photojr cavazos
      Participant

      Were you able to get the pump out of the well? Probably the pump itself is OK but have it tested in a test tank before reinstalling also have a profesional test the motor leads. they could have taken a pretty good yank.: the galvanized pipe broke off at the threads flush with the top of the pump casing. at the same time the electrical wires to the pump were immediately pulled downward until the electrical box hit the top of the pump casing plate. do i need a new pump?

Viewing 1 reply thread
  • The forum ‘Old Bulletin Board Archives’ is closed to new topics and replies.