Inspecting self installed plumbing Home › Forums › Archives › Old Bulletin Board Archives › Inspecting self installed plumbing This topic has 1 reply, 2 voices, and was last updated 24 years, 10 months ago by Harun Magnuson. Viewing 1 reply thread Author Posts 20 Oct 1999 at 3:26 am #284884 tomsengineering Thanks for great home page! I am a low budget, low experienced builder who will be doing my own plumbing. What is the best and cheapest way to test my system in preperation for the inspector (and my own satisfaction)? 20 Oct 1999 at 3:38 pm #308356 Harun MagnusonParticipant You can use water pressure. Cap or plug everything but one vent. Run it ten feet above the rest and fill everything with water. Then check for leaks. Author Posts Viewing 1 reply thread The forum ‘Old Bulletin Board Archives’ is closed to new topics and replies.