Pilot on hot water heater

Home › Forums › Archives › Old Bulletin Board Archives › Pilot on hot water heater

Viewing 2 reply threads
  • Author
    Posts
    • 12 Oct 1999 at 7:46 am #284994
      Avatar photolr
      Member

      The pilots gone out on the hot water heater. Ive followed the instructions, and it still wont light. Any suggestions?

    • 15 Oct 1999 at 3:10 am #308250
      Avatar photoChris
      Participant

      Loosen the pilot tube at the gas valve and see if gas comes out there when you press the start button. If so, remove and clean the pilot orifice. If not, remove the gas supply line at the gas valve and see if you have has there, etc. Of course, use extreme caution.

    • 15 Oct 1999 at 3:10 am #308251
      Avatar photoChris
      Participant

      …if you have GAS there, etc.Sorry

  • Author
    Posts
Viewing 2 reply threads
  • The forum ‘Old Bulletin Board Archives’ is closed to new topics and replies.