- This topic has 1 reply, 2 voices, and was last updated 25 years ago by
Kevin Senick.
Viewing 1 reply thread
-
Posts
-
-
TSMUNRO
I have to install a toilet in an old home where the bathroom floor is quite slanted. To level the bowl/tank would require shimming one side up about 1/2. To level to floor would require raising one end up about 3/4 above the current threshold (already about 1/2 high) and the homeowners do not want to do this. Is there any way to level this toilet given the situation described?
-
I HAVE USED PLASTER OF PARIS BECAUSE IT SETS UP FAST YOU BUILD IT UP PUT THE TOILET ON CHECK IT WITH A LEVEL AND ADD ADDITIONAL PLASTER AS REQUIRED
-
Viewing 1 reply thread
- The forum ‘Old Bulletin Board Archives’ is closed to new topics and replies.
