- This topic has 1 reply, 2 voices, and was last updated 27 years ago by
.
-
Posts
-
-
With a 1.6 gpf toilet, I would like to use an off-set 3 closet flange to avoid notching a floor joist (tight spacing with no option on toilet location). Visually judging, it would appear that a 2 dia. ball would clear the off-set. With a 1.6 gpf toilet, could there conceivable be a flushing problem? Toilet uses elongated siphon action jetted bowl.
-
: With a 1.6 gpf toilet, I would like to use an : off-set 3 closet flange to avoid notching : a floor joist (tight spacing with no option : on toilet location). Visually judging, it : would appear that a 2 dia. ball would clear : the off-set. With a 1.6 gpf toilet, could : there conceivable be a flushing problem? : Toilet uses elongated siphon action jetted : bowl.study this situtation real careful, if at all possible use a regular flange. the very design of most off set flanges make it hard to get a good seal. dont use a horn seal as this will futher block passage. consider adding reinforcement to other side of joist.
-
- The forum ‘Old Bulletin Board Archives’ is closed to new topics and replies.
