- This topic has 3 replies, 4 voices, and was last updated 23 years, 5 months ago by
SylvanLMP.
-
Posts
-
-
MasterPlumbers
I just replaced the seats and stems in my shower. The diverter valve stem wont divert hardly any of the water to the shower head. Help please…..
-
Replace the tub spout with new.
Remove the old one, and replace it with same.
Good Luck,
Bill
The Local Plumber
Tustin, California http://www.TheLocalPlumber.com -
Bama…The last ans. I think the guy was confused. You don’t have a diverter spout you have a diverter in line with the body. I’ll take a shot at this and probably say that there is a good possability that the washer or part of the seat broke off inside and are lodged in the diverter assembly.Second possability could be a clogged shower strainer or head…Those water saver holes are pretty small.When you did your stem repairs alot of crap could have clogged in there. Third possability…Is it a temperature actuated shower body? If there is a clog I usually close up the discharge areas(spout and shower head)and back wash through the stems I’ve had alot of luck with that good luck B
-
My money is with NY plumber I totally AGREE.
-
- You must be logged in to reply to this topic.
