- This topic has 1 reply, 2 voices, and was last updated 24 years, 8 months ago by
Bob Eyrolles.
-
Posts
-
-
Brett Nicodemus
I am remoldling my bathroom, when I removed the floor the flange for the toilet broke. Its cast iron, can you seperate the joints, if so whats the easiest way, should I replace it with another cast iron flange or use plastic. I would like to use plastic and go into the Y joint in the stack.
-
If you are not moving the toilet to a different location, then you can break the flange off the pipe, remove the lead and oakum, slide a new flange onto the pipe, and then remelt the lead, (after sealing the joint with new oakum), and pour the joint.: I am remoldling my bathroom, when I removed the floor the flange for the toilet broke. Its cast iron, can you seperate the joints, if so whats the easiest way, should I replace it with another cast iron flange or use plastic. I would like to use plastic and go into the Y joint in the stack.
-
- The forum ‘Old Bulletin Board Archives’ is closed to new topics and replies.
