- This topic has 3 replies, 3 voices, and was last updated 23 years, 5 months ago by
Guest.
-
Posts
-
-
MasterPlumbers
Please send instrutions on comode instalation.
-
OK Dorothy, it sounds as if you awoke with an abundance of energy this morning.
Instructions to remove and install water closet:
1.) Turn off water supply at valve on wall behind water closet.
2.) Flush water closet to drain water from bowl, tank. Sponge out any remaining water in tank.
3.) Disconnect water supply line from water closet tank.
4.) Remove plastic bolt cover and loosen nuts on the water closet bolts, and remove.
5.) Lift water closet off of bolts and remove.
6.) Remove old wax ring and install new.
7.) Place new water closet over bolts and push down onto wax ring the new water closet, securing to floor.
8.) Replace and tighten nuts to bolts.
9.) Re-install water line to tank.
10.) Turn on water service valve.
Good Luck,
Bill
The Local Plumber
Tustin, California http://www.TheLocalPlumber.com -
If this is a new installation, don’t forget to cut a hole in the floor to place the commode over.
-
An put good wood that takes bleach good caus the wood will get stuff spill on it and rot thru.
-
- You must be logged in to reply to this topic.
