SEARCHED THIS SITE FOR MONTHS & UNABLE TO FIND PARTS

Home Forums Archives Old Bulletin Board Archives SEARCHED THIS SITE FOR MONTHS & UNABLE TO FIND PARTS

Viewing 10 reply threads
  • Author
    Posts
    • #280462

      To: all plumbers,I have not found these items for plumbing and need assistance locating the parts.Perhaps you have installed these items.I wish to order by using computer address so please include the name compt. address and contact person. If you know the price that would be helpful. PARTS NEEDED PRICE 3/4 COPPER PIPE 15 FT AND LONGER WITH THICK WALL30 GALLON LOCHINVAR HOT WATER HEATERSOLAR HOT WATER TANK WITH BACKUP GAS,ELEC.30 with tech support from companySTAINLESS RUST PROOF DEEPWELL PUMP FOR WATER SUPPLY AT 75 FT EST WITH ADJ REGULATIONSTRAIGHT 1/2 INCH FEMALE CHROME WATER VALVE WITH METAL STEM FOR UNDER SINK USE NO 3/8SOLAR ROLL for concrete to heat driveways

    • #305347

      WELL YOU NEED TO CALL YOUR LOCAL PLUMBING SUPPLY HOUSE AND ASK THEM TO GIVE YOU PRICES ON YOUR LIST OF PARTS. PLUMBERS PRICES VERY SO IF I GIVE YOU A PRICE IT MAY NOT BE THE SAME IN YOUR AREA.. 3/4 TPYE L COPPER COST ME ABOUT .57 CENT A FOOT, 30 GALLON WATER HEATER BRADFORD WHITE COST ME ABOUT $130.00, SO IF YOU NEED PRICES IN CALIFORNIA E-MAIL ME I CAN HELP, BUT IF YOU NEED PRICES IN YOUR AREA CALL A SUPPLY HOUSE.. YOUR FRIEND THE PIPEXPERT…. GOOD LUCK!!!!

    • #305348

      WELL YOU NEED TO CALL YOUR LOCAL PLUMBING SUPPLY HOUSE AND ASK THEM TO GIVE YOU PRICES ON YOUR LIST OF PARTS. PLUMBERS PRICES VERY SO IF I GIVE YOU A PRICE IT MAY NOT BE THE SAME IN YOUR AREA.. 3/4 TPYE L COPPER COST ME ABOUT .57 CENT A FOOT, 30 GALLON WATER HEATER BRADFORD WHITE COST ME ABOUT $130.00, SO IF YOU NEED PRICES IN CALIFORNIA E-MAIL ME I CAN HELP, BUT IF YOU NEED PRICES IN YOUR AREA CALL A SUPPLY HOUSE.. YOUR FRIEND THE PIPEXPERT…. GOOD LUCK!!!!

    • #305610

      : WELL YOU NEED TO CALL YOUR LOCAL PLUMBING SUPPLY HOUSE AND ASK THEM TO GIVE YOU PRICES ON YOUR LIST OF PARTS. PLUMBERS PRICES VERY SO IF I GIVE YOU A PRICE IT MAY NOT BE THE SAME IN YOUR AREA.. 3/4 TPYE L COPPER COST ME ABOUT .57 CENT A FOOT, 30 GALLON WATER HEATER BRADFORD WHITE COST ME ABOUT $130.00, SO IF YOU NEED PRICES IN CALIFORNIA E-MAIL ME I CAN HELP, BUT IF YOU NEED PRICES IN YOUR AREA CALL A SUPPLY HOUSE.. YOUR FRIEND THE PIPEXPERT…. GOOD LUCK!!!!To: Pipe Expert Thanks for aattempting to reply however I went to the plumbing shop and they don know or at least take the time to answer my questions.Now today I need to also no the difference in copper pipe types L at 5.79 for 10Ft and type M 5.23 for 10 Ft. A pipe person should know when to use either pipe in plumbing.There must have been a reason for making the two types of copper pipe should you know post your explanation of where to use the different types of pipe. Also it appears the elbows,fittings etc work on either M or L type pipeshavs any plumber used the same fittings for both type pipes and if so do both pipes solder without a problem ?

    • #305611

      : WELL YOU NEED TO CALL YOUR LOCAL PLUMBING SUPPLY HOUSE AND ASK THEM TO GIVE YOU PRICES ON YOUR LIST OF PARTS. PLUMBERS PRICES VERY SO IF I GIVE YOU A PRICE IT MAY NOT BE THE SAME IN YOUR AREA.. 3/4 TPYE L COPPER COST ME ABOUT .57 CENT A FOOT, 30 GALLON WATER HEATER BRADFORD WHITE COST ME ABOUT $130.00, SO IF YOU NEED PRICES IN CALIFORNIA E-MAIL ME I CAN HELP, BUT IF YOU NEED PRICES IN YOUR AREA CALL A SUPPLY HOUSE.. YOUR FRIEND THE PIPEXPERT…. GOOD LUCK!!!!To: Pipe Expert Thanks for aattempting to reply however I went to the plumbing shop and they don know or at least take the time to answer my questions.Now today I need to also no the difference in copper pipe types L at 5.79 for 10Ft and type M 5.23 for 10 Ft. A pipe person should know when to use either pipe in plumbing.There must have been a reason for making the two types of copper pipe should you know post your explanation of where to use the different types of pipe. Also it appears the elbows,fittings etc work on either M or L type pipeshavs any plumber used the same fittings for both type pipes and if so do both pipes solder without a problem ?

    • #305612

      : WELL YOU NEED TO CALL YOUR LOCAL PLUMBING SUPPLY HOUSE AND ASK THEM TO GIVE YOU PRICES ON YOUR LIST OF PARTS. PLUMBERS PRICES VERY SO IF I GIVE YOU A PRICE IT MAY NOT BE THE SAME IN YOUR AREA.. 3/4 TPYE L COPPER COST ME ABOUT .57 CENT A FOOT, 30 GALLON WATER HEATER BRADFORD WHITE COST ME ABOUT $130.00, SO IF YOU NEED PRICES IN CALIFORNIA E-MAIL ME I CAN HELP, BUT IF YOU NEED PRICES IN YOUR AREA CALL A SUPPLY HOUSE.. YOUR FRIEND THE PIPEXPERT…. GOOD LUCK!!!!To: Pipe Expert Thanks for attempting to reply however I went to the plumbing shop and they dont know or at least take the time to answer my questions.Now today I need to also know the difference in copper pipe types L at 5.79 for 10Ft and type M 5.23 for 10 Ft. A pipe person should know when to use either pipe in plumbing.There must have been a reason for making the two types of copper pipe should you know post your explanation of where to use the different types of pipe. Also it appears the elbows,fittings etc work on either M or L type pipes. Has any plumber used the same fittings for both type pipes and if so do both pipes solder without a problem ?Are fitting standard in usa for Lor M copper pipe ?

    • #305613

      : WELL YOU NEED TO CALL YOUR LOCAL PLUMBING SUPPLY HOUSE AND ASK THEM TO GIVE YOU PRICES ON YOUR LIST OF PARTS. PLUMBERS PRICES VERY SO IF I GIVE YOU A PRICE IT MAY NOT BE THE SAME IN YOUR AREA.. 3/4 TPYE L COPPER COST ME ABOUT .57 CENT A FOOT, 30 GALLON WATER HEATER BRADFORD WHITE COST ME ABOUT $130.00, SO IF YOU NEED PRICES IN CALIFORNIA E-MAIL ME I CAN HELP, BUT IF YOU NEED PRICES IN YOUR AREA CALL A SUPPLY HOUSE.. YOUR FRIEND THE PIPEXPERT…. GOOD LUCK!!!!To: Pipe Expert Thanks for attempting to reply however I went to the plumbing shop and they dont know or at least take the time to answer my questions.Now today I need to also know the difference in copper pipe types L at 5.79 for 10Ft and type M 5.23 for 10 Ft. A pipe person should know when to use either pipe in plumbing.There must have been a reason for making the two types of copper pipe should you know post your explanation of where to use the different types of pipe. Also it appears the elbows,fittings etc work on either M or L type pipes. Has any plumber used the same fittings for both type pipes and if so do both pipes solder without a problem ?Are fitting standard in usa for Lor M copper pipe ?

    • #305614

      : WELL YOU NEED TO CALL YOUR LOCAL PLUMBING SUPPLY HOUSE AND ASK THEM TO GIVE YOU PRICES ON YOUR LIST OF PARTS. PLUMBERS PRICES VERY SO IF I GIVE YOU A PRICE IT MAY NOT BE THE SAME IN YOUR AREA.. 3/4 TPYE L COPPER COST ME ABOUT .57 CENT A FOOT, 30 GALLON WATER HEATER BRADFORD WHITE COST ME ABOUT $130.00, SO IF YOU NEED PRICES IN CALIFORNIA E-MAIL ME I CAN HELP, BUT IF YOU NEED PRICES IN YOUR AREA CALL A SUPPLY HOUSE.. YOUR FRIEND THE PIPEXPERT…. GOOD LUCK!!!!To: Pipe Expert Thanks for attempting to reply however I went to the plumbing shop and they dont know or at least take the time to answer my questions.Now today I need to also know the difference in copper pipe types L at 5.79 for 10Ft and type M 5.23 for 10 Ft. A pipe person should know when to use either pipe in plumbing.There must have been a reason for making the two types of copper pipe should you know post your explanation of where to use the different types of pipe. Also it appears the elbows,fittings etc work on either M or L type pipes. Has any plumber used the same fittings for both type pipes and if so do both pipes solder without a problem ?Are fitting standard in USA for Lor M copper pipe ?

    • #305615

      : WELL YOU NEED TO CALL YOUR LOCAL PLUMBING SUPPLY HOUSE AND ASK THEM TO GIVE YOU PRICES ON YOUR LIST OF PARTS. PLUMBERS PRICES VERY SO IF I GIVE YOU A PRICE IT MAY NOT BE THE SAME IN YOUR AREA.. 3/4 TPYE L COPPER COST ME ABOUT .57 CENT A FOOT, 30 GALLON WATER HEATER BRADFORD WHITE COST ME ABOUT $130.00, SO IF YOU NEED PRICES IN CALIFORNIA E-MAIL ME I CAN HELP, BUT IF YOU NEED PRICES IN YOUR AREA CALL A SUPPLY HOUSE.. YOUR FRIEND THE PIPEXPERT…. GOOD LUCK!!!!To: Pipe Expert Thanks for attempting to reply however I went to the plumbing shop and they dont know or at least take the time to answer my questions.Now today I need to also know the difference in copper pipe types L at 5.79 for 10Ft and type M 5.23 for 10 Ft. A pipe person should know when to use either pipe in plumbing.There must have been a reason for making the two types of copper pipe should you know post your explanation of where to use the different types of pipe. Also it appears the elbows,fittings etc work on either M or L type pipes. Has any plumber used the same fittings for both type pipes and if so do both pipes solder without a problem ?Are fitting standard in USA for Lor M copper pipe ?

    • #305616

      : WELL YOU NEED TO CALL YOUR LOCAL PLUMBING SUPPLY HOUSE AND ASK THEM TO GIVE YOU PRICES ON YOUR LIST OF PARTS. PLUMBERS PRICES VERY SO IF I GIVE YOU A PRICE IT MAY NOT BE THE SAME IN YOUR AREA.. 3/4 TPYE L COPPER COST ME ABOUT .57 CENT A FOOT, 30 GALLON WATER HEATER BRADFORD WHITE COST ME ABOUT $130.00, SO IF YOU NEED PRICES IN CALIFORNIA E-MAIL ME I CAN HELP, BUT IF YOU NEED PRICES IN YOUR AREA CALL A SUPPLY HOUSE.. YOUR FRIEND THE PIPEXPERT…. GOOD LUCK!!!!To: Pipe Expert Thanks for attempting to reply however I went to the plumbing shop and they dont know or at least take the time to answer my questions.Now today I need to also know the difference in copper pipe types L at 5.79 for 10Ft and type M 5.23 for 10 Ft. A pipe person should know when to use either pipe in plumbing.There must have been a reason for making the two types of copper pipe should you know post your explanation of where to use the different types of pipe in a home. Also it appears the elbows,fittings etc work on either M or L type pipes. Has any plumber used the same fittings for both type pipes and if so do both pipes solder without a problem ?Are fitting standard in USA for Lor M copper pipe ?

    • #305617

      : WELL YOU NEED TO CALL YOUR LOCAL PLUMBING SUPPLY HOUSE AND ASK THEM TO GIVE YOU PRICES ON YOUR LIST OF PARTS. PLUMBERS PRICES VERY SO IF I GIVE YOU A PRICE IT MAY NOT BE THE SAME IN YOUR AREA.. 3/4 TPYE L COPPER COST ME ABOUT .57 CENT A FOOT, 30 GALLON WATER HEATER BRADFORD WHITE COST ME ABOUT $130.00, SO IF YOU NEED PRICES IN CALIFORNIA E-MAIL ME I CAN HELP, BUT IF YOU NEED PRICES IN YOUR AREA CALL A SUPPLY HOUSE.. YOUR FRIEND THE PIPEXPERT…. GOOD LUCK!!!!To: Pipe Expert Thanks for attempting to reply however I went to the plumbing shop and they dont know or at least take the time to answer my questions.Now today I need to also know the difference in copper pipe types L at 5.79 for 10Ft and type M 5.23 for 10 Ft. A pipe person should know when to use either pipe in plumbing.There must have been a reason for making the two types of copper pipe should you know post your explanation of where to use the different types of pipe in a home. Also it appears the elbows,fittings etc work on either M or L type pipes. Has any plumber used the same fittings for both type pipes and if so do both pipes solder without a problem ?Are fitting standard in USA for Lor M copper pipe ?

Viewing 10 reply threads
  • The forum ‘Old Bulletin Board Archives’ is closed to new topics and replies.

Pin It on Pinterest

Share This