- This topic has 1 reply, 2 voices, and was last updated 25 years, 4 months ago by
Ruben Garcia.
-
Posts
-
-
jelp
I have a wall heater with a mutivolt thermostat. I have replaced the thermostat but the heater will not ignite. When I jump the two screws at the thermostat or at the heater control, the wall heater comes on. After the heater heats the room and turns off, the thermostat will not re-ignite the heater again.
-
Did you use a powerpile themostat as a replacement. A regular thermostat has a heat anticipator which could cause that type of problem.: I have a wall heater with a mutivolt thermostat. I have replaced the thermostat but the heater will not ignite. When I jump the two screws at the thermostat or at the heater control, the wall heater comes on. After the heater heats the room and turns off, the thermostat will not re-ignite the heater again.
-
- The forum ‘Old Bulletin Board Archives’ is closed to new topics and replies.
