- This topic has 1 reply, 2 voices, and was last updated 25 years, 8 months ago by
Paul.
Viewing 1 reply thread
-
Posts
-
-
Karin
Can you cap the in and out pipes to rad separately or do you need to conect the 2 after rad removal. Thanks for any help, Paul
-
It is always best to connect the lines together to maintain proper flow. But if the radiator has a shut-off valve on it, then you can cap the lines. If it does not, then you have to check the piping to see if it is a continuous loop or a main loop with the radiators tapped off the main piping.: Can you cap the in and out pipes to rad separately or : do you need to conect the 2 after rad removal. Thanks for : any help, Paul
-
Viewing 1 reply thread
- The forum ‘Old Bulletin Board Archives’ is closed to new topics and replies.
