- This topic has 1 reply, 2 voices, and was last updated 23 years, 7 months ago by
SylvanLMP.
Viewing 1 reply thread
-
Posts
-
-
MasterPlumbers
I punctured my waste line from my upstairs bath while installing some cabinets below. Is there a plug or epoxy you could recommend for a quick fix?
-
This depends on the material of your piping?
Lead, copper, cast iron, steel or plastic.
There is a Skinner clamp that is used for temporary repairs Or you can cut out a section of piping and install a No Hub coupling Or if the hole is small enough you can use Hercules propoxy Or if it is ferrious metal you can use a torch applied Black and white BUT have a fire extingusher near by.
If it is lead or copper piping you could use a bar solder like Flemco # 1 and lead wipe and easy repair using a non acid flux
-
Viewing 1 reply thread
- You must be logged in to reply to this topic.
