- This topic has 1 reply, 2 voices, and was last updated 26 years, 6 months ago by
.
-
Posts
-
-
lightningrodguy
Our whirl pool bath is about 7 years old. It came when we bought the house. One night when we was using it the pressure went to almost nothing. The motor is working fine. And it pumps a little pressure, not much. Is there anything that we could do to this bath to check it before we start removing drywall. Mike
-
: Our whirl pool bath is about 7 years old. It came when : we bought the house. One night when we was using it : the pressure went to almost nothing. The motor is : working fine. And it pumps a little pressure, not : much. Is there anything that we could do to this bath : to check it before we start removing drywall. : Mike It may be that the air intakes on the deck of the tub are screwed down. Make sure the air intakes are letting air in. Check also the suction fitting at the low end of the tub to make sure it isnt blocked.http:www.terrylove.com/jet.htmRegards, Terry Love
-
- The forum ‘Old Bulletin Board Archives’ is closed to new topics and replies.
