Reply To: ABS piping

Home Forums Public Forums General Plumbing ABS piping Reply To: ABS piping

#289316
Avatar photofourth year
Participant

    Depending on how good you glued them, you can try cutting the fitting’s hub right at the end of the pipe, then make a cut through the hub just to the pipe. Then you can sometimes use a sharp screwdriver between the hub and the pipe to separate them. If it starts to separate, then the whole fitting often comes apart. If it takes a piece of the pipe in the process then you will have to cut the pipe off, but you would have had to do that anyway.

    Pin It on Pinterest

    Share This