Reply To: New Tub Installation, Drain/Overflow Connection Question

[racefanoneParticipant]

Mike ,I would cut off the pvc and attach a trap adaptor.You might have to first use a pvc coupling and a short piece of pvc pipe and then the trap adaptor.The trap adaptor is nothing more than a male adaptor with a slip nut and gasket.The slip nut and gasket fits onto the waste and overflow and tightens down on the male threads of the trap adaptor.Hope this helps you You didnt say if there was a trap on the existing line.I assume there is ,if not you will need to install one.

» This message has been edited by racefanone on 23 October 2002