Any ideas on trying to pop the drains out of the sinks from underneath? I don’t know how well that plumbers epoxy sets on the acrylic surface.
I currently have the top of the drains sealed with silicone, but it’s not curing to the acrylic and the leaks are coming back. I could try to stuff some plumbers putty around the edges, but I’m doubtful that I could get enough in to seal them fully. Best solution would be to pop them up and then seal properly with the putty.
Any ideas on the strength of the epoxy on such a surface?
» This message has been edited by Scoob on 01 May 2004