racefanone
You can put a y fitting on the drain line coming out of the wall and run seperate lines to the disposer and to the other side of the sink.If you do this each side will have to have seperate p traps.The non disposer side of the sink does not have to run into the disposer .The main thing is to put a p trap on the disposer and a p trap on the ” non disposer” side as well. Actually when a disposer kit,with a diverter tee,is used the disposer side of the sink runs into the ”non disposer ”side of the sink .
» This message has been edited by racefanone on 04 August 2003
