Reply To: Air in Hot water lines

Home Forums Public Forums General Plumbing Air in Hot water lines Reply To: Air in Hot water lines

Avatar photobungie

    You have the wrong annode in the hot water system.

    In a hot water system you have a black anode (magnesium) for area’s with less than 600 parts per million of suspended solids (not sure of the correct expression , but the count is correct)any higher than that and the anode bubbles. Hence above that count you use a blue anode (aluminum). Its possible under those circumstances that given the unit with a black anode in an area with the count greater than 600ppm WILL create bubbling in the tank.


    All advice is given with-out seeing the job, and hence all advice MUST be taken as advice with limited knowledge on the exact situation. NO responsibility can or will be taken. And yes, I am a licensed Plumber and Drainer with my own business in Brisbane Australia.
    Try visiting ….
    Macadamia nuts and Aussie productsProstate cancer kills 2600 per/year in AustraliaEcommerce books

    Pin It on Pinterest

    Share This