Home › Forums › Public Forums › General Plumbing › SETS Water Heaters
- This topic has 1 reply, 2 voices, and was last updated 23 years, 11 months ago by Guest.
-
AuthorPosts
-
-
25 Feb 2001 at 12:17 am #274678MasterPlumbersKeymaster
Does anyone know anything, pro or con, about the SETS Water Heater systems? We are considering buying one but we do not know of a master plumber in our area that installs them. Does anyone know of anyone in the Memphis, TN area that does that?
-
25 Feb 2001 at 12:44 am #290168GuestParticipant
http://www.tankless-water-heater.com/
http://www.korient.com/16Elecwat/Elecwat.htm
http://www.termotronic.com/termoi/
http://www.plumbingproducts.com/eemaxso.html1. While the shower has its own source, what does one do about the other fixtures? Do they each have their own point-of-use heaters? Are they by supplied by a central water heater – if so, why bother with the point-of-use unit other than to have one supply tube going to it?
Unless the electricity is produced by a dam or atomic energy, the electricity is produced by burning a fuel. the line losses transmitting the electricity are high; so most electric rates are 3 times the cost of providing the heating by burning fuels in the home. Cutting the electric bill in half by making the electric usage more efficient still makes electricity more expensive.
The typical family bill for gas or oil hot water is $250 per year. The typical electric bill for the same hot water use is $800 per year. Cutting the electric bill in half still makes it $150 per year more expensive – and the cost of installation of the point-of-use electric heater is very high.
These are reasons central, fuel-fired water heaters are still preferred in the majority. Only one, long-lasting appliance required. When an instantaneous unit is used for the whole house, the small tubes lime up in many areas and a small flow from only one tap of less than 1/2 gpm makes the unit hunt. A point-of-use heater at a sink for coffee or a small sinkful does make sense, small quantities make for small bills. Showers and washers make for large bills.
The firms listed below were identified as suppliers of the technology at the time of this report’s publication. This listing does not purport to be complete, to indicate the right to practice the technology, or to reflect future market conditions.
CRISPAIRE/E-TECH
Crispaire Corporation
3570 American Drive
Atlanta, GA 30341
David Shuford
Vice President – Marketing
(404) 458-6643; Fax (404) 457-2352DEC/Therma-Stor
P.O. Box 8050
Madison, WI 53708
Bernie Mittelstaedt
(800) 533-7533; Fax (608) 222-1447Quantum/Energy Plus International
P.O.Box 30065
Palm Beach, FL 33420-0085
Charles O’Neill
(561)842-3778; Fax (561)842-3778In addition, the following manufacturers are developing new residential/light commercial HPWH products that are scheduled to be released in 1997:
Colmac Coil Manufacturing Co.
P.O. Box 72
370 N. Lincoln
Colville, WA 99114
Joel Lewinshon
(509) 684-2595; Fax (509) 684-8331WaterFurnace International
9000 Conservation Way
Fort Wayne, IN 46809
Bob Brown
(219) 478-5667 ext 254; Fax (219) 478-3029http://www.energykinetics.com/heatingfuelcomparisons.html
http://www.uniongas.com/Residential/ResCostComp/western.asp
http://www.warmair.net/html/fuel_cost_comparisons.htm
http://www.nwnatural.com/residential/pdf/heating_albany.pdf
http://www.svswe.com/html/Marketing/energy_comp.htm
http://www.riversidegasandoil.com/fuel_cost_info.htm
-
-
AuthorPosts
- You must be logged in to reply to this topic.