recirculating hot water

I don’t know of a valve that will work for what you want, but I have heard of several pumps that do.

Check out the Chilipepper appliance. The website URL is http://www.chilipepperapp.com Another device is the Metlund system. URL: http://www.metlund.com

Hope this helped

[Edited by wlundonly on 18 May 2000]

Contact NIBCO MFR. and ask for “just Right” it is a non electric circulation device. Try reading this article for more information

http://www.masterplumbers.com/plumbing/plumbviews/rec_pump.html

Good luck

thanks for the referrals…i was looking for a self contained non electric specialy valve with the ability to thermally transfer water at a slow rate. probably similar in operation to the nibco except it mounts under a sink, with no return line.

Thermal water circulation requires that the hot water line to the subject fixture must be on a continual uphill pitch. The thermal flow will stop immediately at the first down turn of any magnitude. The return water to the heater should also slope downhill to the water heater, but that is not quite as important, since that water will usually be at ambient temperature and will be displaced by the rising hot water. If your hot and cold water lines meet these criteria, or can be repitched to conform to the requirements, then the NIBCO valve can be installed between the hot and cold water lines under the sink or bathtub.