- This topic has 2 replies, 3 voices, and was last updated 20 years, 2 months ago by
Retired plbg1.
Viewing 2 reply threads
-
Posts
-
-
MasterPlumbers
CLOG IS LOCATED JUST PAST 90 DEGREE TURN. CAN NOT GET AUGER TO TURN CORNER. CAN YOU SUGGEST ANYTHING? WILL COMPRESSED AIR WORK?
I’VE TRIED CHEMICALS– LIKE LIQUID PLUMBER THEY DONT WORK. -
Use a drain bladder to see if that will remove the obstruction.
Plunger the drain also.
If these all fail, I would use a electric drain cable down the overflow of tub drain and spin the cable in reverse to get it to start to go through the trap.
Once you pass past the trap, return the machine to forward direction and move the cable inwards to remove the obstruction.
“Your best interest is secured by making the right decisions the first time.” -
If you can use a wet vac then tape a piece of water hose on it and see if it will work.
-
Viewing 2 reply threads
- You must be logged in to reply to this topic.
