installing toilet in basement

Home › Forums › Public Forums › General Plumbing › installing toilet in basement

  • This topic has 3 replies, 3 voices, and was last updated 22 years ago by Avatar photobozo.
Viewing 3 reply threads
  • Author
    Posts
    • 11 Jan 2003 at 7:03 pm #276194
      Avatar photoMasterPlumbers
      Keymaster

        to install toilet with a pump up type system when i install crock how far does that have to be from toilet? my main drain is about 3ft up on the wall.and i know i have to cut the concrete to install toilet.i will install crock with the ejector pump in it . any good suggestions that any one might have before i start cutting concrete i would appreciate hearing thanks mark.

      • 13 Jan 2003 at 11:12 pm #293604
        Avatar photoRetired plbg1
        Participant

          Keep it as far as you can for noise and smell, they have to be vented and put co. in the line.

        • 15 Jan 2003 at 2:52 am #293605
          Avatar photobozo
          Participant

            Mark,put the unit where it will best work for your setup.A decent unit will not make much noise and will not smell if installed properly.Dont forget to put a check valve in the discharge side.

          • 15 Jan 2003 at 2:56 am #293606
            Avatar photobozo
            Participant

              Come on retired plbg,think before you reply,my my.

          • Author
            Posts
          Viewing 3 reply threads
          • You must be logged in to reply to this topic.

          Pin It on Pinterest

          Share This