Copper pipe

Home Forums Archives Old Bulletin Board Archives Copper pipe

Viewing 2 reply threads
  • Author
    Posts
    • #284230
      Avatar photoDon Scott

        What is the regulation in USA for Copper pipework in buildings? i.e. What grade pipe can be used where, and what is the most common sizes used?

      • #306755
        Avatar photoDavid Steblina
        Participant

          : What is the regulation in USA for Copper pipework in buildings? : i.e. What grade pipe can be used where, and what is the most common sizes used? in homes up to six baths in my area we use: type L 1/2 branch 3/4 trunk 1 service supply occasionally we will use type K for buried pipe if specified, however our soil condition is netural

        • #306797
          Avatar photoDavid Steblina
          Participant

            : : What is the regulation in USA for Copper pipework in buildings? : : i.e. What grade pipe can be used where, and what is the most common sizes used? : in homes up to six baths in my area we use: : type L : 1/2 branch : 3/4 trunk : 1 service supply : occasionally we will use type K for buried pipe if specified, however our soil condition is neturalWe use Type L for all above ground water lines and type K for under ground. If we use low down tanks ( toilet tanks) we can use a 3/4 line just like you sized BUT If we use flushometers we normally use a 11/2 line the volume required is much more than for a T&B Sylvan

        Viewing 2 reply threads
        • The forum ‘Old Bulletin Board Archives’ is closed to new topics and replies.

        Pin It on Pinterest

        Share This