- This topic has 2 replies, 2 voices, and was last updated 25 years, 9 months ago by
Harry.
-
Posts
-
-
Volchup
I am trying to install a new bathroom sink. When I removed the old one, the drain pipe broke off flush with a brass elbow at the face of the wall. The only way I could remove the piece of broken pipe was to cut it out. When I did this I damages some threads of the brass elbow. Can I install a new pipe in this elbow so it wont leak?
-
: I am trying to install a new bathroom sink. When I removed the old one, the drain pipe broke off flush with a brass elbow at the face of the wall. The only way I could remove the piece of broken pipe was to cut it out. When I did this I damages some threads of the brass elbow. Can I install a new pipe in this elbow and solder it so it wont leak?
-
: I am trying to install a new bathroom sink. When I removed the old one, the drain pipe broke off flush with a brass elbow at the face of the wall. The only way I could remove the piece of broken pipe was to cut it out. When I did this I damages some threads of the brass elbow. Can I install a new pipe in this elbow so it wont leak?yes it ok, try using teflon paste on the thread, or silicone (rough, but it works fine)
-
- The forum ‘Old Bulletin Board Archives’ is closed to new topics and replies.
