Home › Forums › Archives › Old Bulletin Board Archives › Whirlpool Washer leaks from bottom › Reply To: Whirlpool Washer leaks from bottom
29 Nov 1999 at 1:35 am
#308923
Participant
Try filling the tub with a couple of inches of water using a garden hose and see if it leaks. If it leaks then the tub seal is cracked. You can fix it yourself by removing the inside tub and replacing the seal. Cost of seal depends on where you buy it. $12-$30. Try JOHNSTONE SUPPLY. If it dosnt leak then perhaps the hose from the fill valve to the fill spout is cracked. Just replace as needed. The top and back of washer is removable as well as the sides. GOOD LUCK Doug in the woods
