Jim Morrice
: I have just installed a shower, washbasin and toilet in my basement, using the roughed in plumbing provided by the builder. The toilet is an Eljer Murray model and seems to work OK, however, after the bowl water leaves the the bowl in the flush cycle, and the bowl begins to fill to its normal level, bubbles about 2-4 inches in diameter, bubble up from the drain for about 3-4 seconds, then stop. It does this during every flush cycle. Ive never seen this before, any ideas.: Note to Sylvan: Do you have any specific comments about the Eljer Murray? Eljer is a decent product. About the bubbles it is a venting problem. Possibly missing or blocked. You may want to contact the builders plumber and have him perform a smoke test. GL Sylvan
