Reply To: Polybute to copper connection

Home › Forums › Public Forums › General Plumbing › Polybute to copper connection › Reply To: Polybute to copper connection

20 Sep 2000 at 1:06 am #287966
Avatar photoSylvanLMP
Participant

Try gettng Poly by Female IPS adapter OR Poly by MIPS adapters

Then use a copper MIPS to connect to the poly Female Or a Copper female adaper to a Poly male adapter DO NOT solder near the poly pipe.

Give yourself about 10″ lenth to act as a heat sink.

Use Teflon paste or tape. Dont over tighten GOOD LUCK