Thank you for a very informative and thorough reply! I am putting to use several of your suggestions. I have also spoke with Eljen and they are sending me an info packet on their products since there are no distributors here in Wichita Kansas. The products on their website appear complex compared to my situation but it will be nice to look over their info. I think I am going to go with a modification of the french drain using a combination of perforated and non-perforated corregated drain tile. The french drain will run parallel the entire length of the house about 5 1/2 feet away. Then lay a solid sheet of 6×25 6mil black plastic from the edge of the house extending to and overlaping into the french drain then cover the plastic with sod. Then connect the french drain to the swale which also runs parallel to the house about 25 feet away with two (or three) separate branches of drain tile also set in a french drain. This will require that I modify my swale by trenching and laying down drain tile in it as well. Anyway, that’s my plan so far. Hmm, hope it works!
Thanks again for your help.