daveroconn
Please try tp drain your expansion tank
The only way an expansion tank can drain is for air behind the bladder to push it out. If your tank does not drain completely than it does not have enough air in it to displace the water inside. And the bladder may have a hole in it. If this is the case buy a new tank.
To drain an expansion tank
First you need to drain the tank as far as it can go by itself. Next using a bicycle tire pump up the tank only until the water begins to flow out alow water to stop then add more air. Do not over pump the tank or you may ruin the bladder. Keep doing this until you are sure all of the water is out of the tank. Now to obtain the propper air pressure this can only be checked with the tank empty. Most well tanks use 27 PSI empty. Now it would be a good time to disinfect the tank with some bleach. Use an empty filter sump housing to introduce about a 1/2 cup of bleach into the tank you will need some valves to do this. Now rinse the tank by filling it and draining it sevrall times.
