Reply To: Re=sweating pipe fitting’s

Home › Forums › Public Forums › General Plumbing › Re=sweating pipe fitting’s › Reply To: Re=sweating pipe fitting’s

7 Aug 2003 at 2:45 am #294852
Avatar photonicktheplumber
Participant

    You need to drain the water from the pipe. You will never be able to solder the joint while the fitting has water in it. If you are lucky you may be able to reheat the dry joint and seal it with extra solder. Otherwise you will have to take the joint apart, clean it up, and re-solder the joint.

    NtP

    Pin It on Pinterest

    Share This