Dirty water…

I think their could be two problems here.The first possible problem could be severely coated pipes. It sounds like sediment from the inside of the pipe could be breaking down and going into your water.Another problem could be your source. Your pump or water distributors pump / source could be drawing in sediment.Also, is any line flushing going on in your area (if on a network). When lines are flushed you can expect the water to be cloudy for up to 4 days.The only solution to sediment in your pipes is flushing and/or using a corrosive agent to dissolve the sediment. You may not want to use a corrosive agent if on a septic system. The corrosive chemical could kill neccessary bacteria in your septic system. When corrosive agents are added to a line the line must be VERY well flushed before you use it.A solution to sediment in your source is a fine filter on the inlet to your home. Do not use any filter if you think the problem is your well. If you are using a well there could be a bigger problem there and it should be closely looked at.

: The only solution to sediment in your pipes is flushing and/or using a corrosive agent to dissolve the sediment.Is that something I can do as a homeowner or it that something the water company has to do? If I can.. what would I get and where?We do have a problem with the pipes in this city because they didnt add some required machines to the system and we do not have city water… Is the water safe for drinking when it is clear?

To properly flush your pipes you would most likely need to have a pro come in and attatch a pressure pump to your system. Im unsure of prices, I assume it would be no more than $50.Sediment removing chemicals can be dangerous and hard to select. They are readily available through some industrial supply companies.I found a web site that shows products of this type. You may want to contact this company and ask them what they suggest for cleaning drinking water piping. You will need to tell them what type of pipes you have (copper, PVC etc…). REMEMBER to tell them you need to clean DRINKING water pipes.If they have a suitable product ask them how to put it into your system. If they are nice they may even know a local outlet where you can purchase the same product.

I forgot a few things last time.Remember this problem may not even be your pipes. You said the water company had problems. Phone them and ask them where you are getting your water from. Ask them if they are expecting the water to be dirty at any time and is the water safe to drink. If they say they do expect it to be dirty, you can buy a filter or complain a whole bunch to them (they may fix it).Also, just because your water is clear doesnt mean it is clean. The worst things in water are unseen to the eye. The silt you see is considered to be harmless but is very disgusting.If your water is supplied by a state run water authority strict regulations stated by the EPA must be followed. If these regulations are not met very large fines can be levied.If your water supplier is private or even personal (on your property) there is not much way to know if the water is safe. You may want to get it tested by a local lab. DO NOT get a test that is advertized as Quick or In your house, right infront of your eyes. A proper lab facility will be able to prove they are registerd under a government liscense.The chances are if you have lived in your house and drank the water for more than 5 years and dont feel sick; there is nothing to worry about.