kitchen garbage disposal installation

There is no one correct way. buit the usual way is to connect the other isnk tothe drain pipe in the wall and put a tee below that sink for the disposer (Disposal is a trademark of GE),: I want to install a garbage disposal under double kitchen sink. What is the correct way of draining the 2 sinks.

: There is no one correct way. buit the usual way is to connect the other isnk tothe drain pipe in the wall and put a tee below that sink for the disposer (Disposal is a trademark of GE),: : I want to install a garbage disposal under double kitchen sink. What is the correct way of draining the 2 sinks.The waste outlets should not be less than 1-1/2 inces in diameter. check with your local codes or someone in your areas that is familiar with the jurisdiction. Normally there is only one trap if its no more than 30 inches from center to center of your sinks opening. This set up would come to a diverting tee fitting and a continous waste. I.E no right or wrong way to do this.

: : There is no one correct way. buit the usual way is to connect the other isnk tothe drain pipe in the wall and put a tee below that sink for the disposer (Disposal is a trademark of GE),: : : I want to install a garbage disposal under double kitchen sink. What is the correct way of draining the 2 sinks.: The waste outlets should not be less than 1-1/2 inces in diameter. check with your local codes or someone in your areas that is familiar with the jurisdiction. Normally there is only one trap if its no more than 30 inches from center to center of your sinks opening. This set up would come to a diverting tee fitting and a continous waste. I.E no right or wrong way to do this.commercial it would be 2 inches.

: I want to install a garbage disposal under double kitchen sink. What is the correct way of draining the 2 sinks.

: : There is no one correct way. buit the usual way is to connect the other isnk tothe drain pipe in the wall and put a tee below that sink for the disposer (Disposal is a trademark of GE),: : : I want to install a garbage disposal under double kitchen sink. What is the correct way of draining the 2 sinks.: The waste outlets should not be less than 1-1/2 inces in diameter. check with your local codes or someone in your areas that is familiar with the jurisdiction. Normally there is only one trap if its no more than 30 inches from center to center of your sinks opening. This set up would come to a diverting tee fitting and a continous waste. I.E no right or wrong way to do this.

I want to remoe and make work a stalled or busted garbage disposer. What is the correct way of doing this? Cut off the electric and son on. The circuit breaker is not individually identified.

: There is no one correct way. buit the usual way is to connect the other isnk tothe drain pipe in the wall and put a tee below that sink for the disposer (Disposal is a trademark of GE),: : I want to install a garbage disposal under double kitchen sink. What is the correct way of draining the 2 sinks.

: : i need instructions (specific as possible) on how to remove broken existing disposer unit. After I disconnect drain pipe (to trap) what is next?