Home › Forums › Archives › Old Bulletin Board Archives › kenmore model 70 washing machine
- This topic has 18 replies, 2 voices, and was last updated 25 years ago by pat.
-
AuthorPosts
-
-
2 Feb 1999 at 12:07 pm #280894JoeChoniski
washing machine wont spin. where do i start to look for the possible problem. thanks
-
28 Dec 1999 at 1:02 am #305150patParticipant
: washing machine wont spin. where do i start to look for : the possible problem. thanks
-
28 Dec 1999 at 1:02 am #305151patParticipant
: : washing machine wont spin. where do i start to look for : : the possible problem. thanks
-
28 Dec 1999 at 1:02 am #306482patParticipant
: : : am looking for be a service rep. in my area, I have a apliances repair service in Orange County in Orlando FL
-
28 Dec 1999 at 1:02 am #306889patParticipant
washing machine is leaking water. What are the possible causes. It is making the floor wet during the washing cycle. Otherwise it is working okay.
-
28 Dec 1999 at 1:02 am #307322patParticipant
: washing machine wont spin. where do i start to look for : the possible problem. thanks
-
28 Dec 1999 at 1:02 am #307611patParticipant
washing machine wishywashing is not working. Switching rod poped to far forward. The rod that switches the pump from drain to free spin. What is the way of fixing it? Thanks
-
28 Dec 1999 at 1:02 am #307664patParticipant
I have an old Sear Kenmore washer. It is probably at least 15 years old. I believe it is a Model 70 (I can barely make it out on the front control panel) The engraved Model number on the little plate on the front bottom left side of the machine is: 72675610.Most of the lettering and numbering is worn off. At one time, there was (what seemed to be) a photocopy (perhaps from some owners manual) of the control panel taped around the main timer knob. Now, its gone.I need a picture of some sort that shows the lettering and numbering on the control panel for each of the 3 knobs. I believe these knobs (from left to right) are:1. Water Level (3 postions – LOW, MED, HIGH) 2. Main Timer Knob (I remember a Permanent Press setting, and timed settings) 3. Water temperature (5 or 6 positions? Warm/warm, warm/cold, cold/cold, etc)I couldnt get any help from Sears. Does anybody have any suggestions? Can anybody scan some pages from their manual and send them to me? Please reply to me personally.Thanks in advance.
-
28 Dec 1999 at 1:02 am #308062patParticipant
: washing machine wont drain. where do i start to look for : the possible problem. thanks
-
28 Dec 1999 at 1:02 am #308162patParticipant
: washing machine wont spin. where do i start to look for : the possible problem. thanks
-
28 Dec 1999 at 1:02 am #308368patParticipant
: : washing machine wont spin. where do i start to look for : : the possible problem. thankscheck rubber coupling between motor and drive
-
28 Dec 1999 at 1:02 am #308518patParticipant
My washer wont spoin or agitate, it just makes a loud buzzing noise. What would the problem be?
-
28 Dec 1999 at 1:02 am #308955patParticipant
: My washer wont spoin or agitate, it just makes a loud buzzing noise. What would the problem be?
-
28 Dec 1999 at 1:02 am #309095patParticipant
My washing Machine spins slow when trying to wash. Can you help.
-
28 Dec 1999 at 1:02 am #309140patParticipant
: washing machine wont spin. where do i start to look for : the possible problem. thanks
-
28 Dec 1999 at 1:02 am #309171patParticipant
: : : washing machine wont spin. where do i start to look for : : the possible problem. thanks
-
28 Dec 1999 at 1:02 am #309177patParticipant
my washing machine is locked up and i dont know how to fix it
-
28 Dec 1999 at 1:02 am #309178patParticipant
kenmore washer wont drain. when moving drive belt by hand the shaft on the pump appears locked up. should pump be replaced? could something be inside the pump? can bushings be replaced or should the whole assembly be thrown out?
-
28 Dec 1999 at 1:02 am #309227patParticipant
: Washing machine spin, but nothing move or turns around. Where do I start to look for the possible problem. Thanks
-
-
AuthorPosts
- The forum ‘Old Bulletin Board Archives’ is closed to new topics and replies.