Home › Forums › Public Forums › Gas & Gasfitting › Pilot Lights and Thermal Couplers › Reply To: Pilot Lights and Thermal Couplers
You know it never seems to amaze me how stupid some “employee” lack of mentality can be.
Here you are the consumer not complaining about the actual price of the repair BUT what can be done to get more longevity out of this condition.
This “Helpers” lack of mentality is one of the major reasons the new comers into this one time profession are now getting STUMBLE BUM pay.
Only a bonifide idiot would say $$$ is to high to pay.
I personally AGREE that the HELPER/Apprentices should have NO benefits Or should NEVER EVER be paid more then minimum wages.
I feel the franchises are correct that a “plumber” can be trained in 12 weeks as why spend more for educaton?
For arguments sake lets say a legitimate plumber has a business and pays upwards of $40,000 per year for insurance and Has REAL mechanics (NOT stumblebum helpers) that get in the “envelope” $45 per HR PLUS benefits like hospitalization, paid vacations, union check off for IDIOT training programs (that are now proven failures)
And lets suppose this Plumbing contractor has a fully stocked van and this van has a driver and uses gas and has insurance and this van cost MONEY to buy — operate — and Maintain.
Lets forget the training costs to tech a brain dead loss leader HELPER to learn to keep their mouth shut on topics they have no idea what they are talking about.
I am sure the plumber who replaced the thermo couple has a phone THIS phone cost money.
I would imagine this plumber has at least one person answering the phone, this phone person also likes to get paid.
Of course the plumber used his BARE HANDS to remove this thermo couple and NOT any tools as tools cost money and why should tools be figured as part as over head.
The knowledge to remove the thermo coupling came FREE as ANYONE can do it… no training or skills required in a helps mind.
This helpers lack of gray matter is the reason I only have full fledged mechanics working for me as I cannot tolerate stupidity in the field.
Apprentices are NOT ALLOWED to work by themselves the ruling should also be they should be gagged before they are let out of the cage.
The price you paid to have a Qualified journeyman come out was CHEAP knowing you also had him/ her check your flue for spillage and possibly adjust your flame to a slightly lower setting so it wont burn out this couple.
It could also be the environment that causes this like bleach or other chemicals present.
What you did pay was what most Qualified plumbers would charge for regular time if not more.
Suppose this helper took into consideration traveling time AFTER all these HELPERS do like getting paid traveling to each job UNLESS of course these folks are only paid for PRODUCTIVE work by the actual work order.
I just hired another Licensed Master to install a wire from a water meter to a remote censor as I am too backed up in work to get there.
His price for 8 feet of bell wire installed in less than 20 minutes of actual work came to $270 and I was thankful he was able to get there even though it took his men over 1 hour stuck in traffic.
Amazing how employees think the boss makes TOO MUCH for a simple job BUT if the boss said “Hey helper today you only swept the shop ILL pay you $5.00 as IT WAS A SIMPLE job ILL bet then it would be another story.
I am able to bill OVER $225 per HR for ONE MAN (LABOR) yet I personally don’t think its enough considering there are only 1,200 Licensed master plumbers in NYC and over 50,000 Lawyers who make more then the chump change I make.
Personally I think you should ONLY hire NON UNION plumbers as why should you the consumer have to be forced paying for a union apprentice getting an education off your back?
An apprentice is USELESS to you as they cannot do the job they are there to learn and YOU pay for this wasted time carrying their employment
An apprentice is not needed when doing simple tasks so why should the employer pay these leaches for non billable time?
Next time instead of hiring ANY UNION plumbing contractor CALL SEARS or another gas appliance firm who can work much cheaper.
Actually I think the Gas UTILITIES should service all gas fired appliances as they can do it much cheaper and better as they only HIRE skilled craftmen.
I am sure the union mechanics get way too much money why have an apprenticeship?
If the folks don’t know the trade don’t hire them..
Lots of big city schools have plumbing classes, get trade school kid to do this kind of work CHEAPER then the union NON qualified helpers.
Actually your better off asking to see the masters license and if they are not the owner himself DON’T allow them in your home.
Think of the LMP as a doctor and the apprentice as the bed pan jockey as that is all an apprentice is legally allowed to do is clean up after his mechanic and possibly get the coffee if they don’t screw that up also.
Why not contact the manufacturer and mail them copies of the bills you paid and see if they will give you the name of a factory authorized repairman.
