Reply To: house trap

Home › Forums › Public Forums › General Plumbing › house trap › Reply To: house trap

#296011
Avatar photonicktheplumber
Participant

The “house trap” is basically a “U” trap installed inside the foundation perimeter at the point where the building drain discharges into the building sewer line (which is the line outside of the foundation perimeter that routes the wastewater to either the municipal sewer or the private septic system.

Such “house traps” were commonly installed in the past, but they are not required by any current code. I happen to like them, but that’s just my opinion. They must be properly installed and accessible for cleanouts. Improperly installed and inaccessible they can be a royal pain when they clog up.

If the house is plumbed to modern standards, all the fixtures have a proper trap and will prevent sewer gases from entering the house. The old “house drain” is thus superfluous.

far more useful, from the DWV point of view, is the proper installation in the building sewer system of Kelly fittings, which allow downstream and upstream cleanouts when necessary.

NtP