Reply To: HWT Sludge and Dielectric Couplers

Home › Forums › Public Forums › General Plumbing › HWT Sludge and Dielectric Couplers › Reply To: HWT Sludge and Dielectric Couplers

#286506
Avatar photohj
Participant

Ohms is a resistance measurement. If the dielectric unions were not doing their job, the resistance would be zero. Without water in the tank, the resisance measurement should be infinite. Your reading just shows that water itself carries a part of the current and can also bridge a dielectric union. Next time use brass nipples and see if that stops the process. Any change to the outside of the heater is due to environmental causes, not the water inside it.