Reply To: Toilet mounting method.

Home › Forums › Public Forums › General Plumbing › Toilet mounting method. › Reply To: Toilet mounting method.

#285749
Avatar photoGuest
Participant

Yes…Run the bolts with rubber washers under the bolt head. On the bottom of the tank, place a rubber washer, metal washer then a nut and snug them down somewhat firm.
Then place the tank onto the bowl, after you replace the big gasket, and use a metal washer and nut on the bottom of the bolt.
You should have some little plastic/rubber “u” shaped pieces that go between the tank and bowl. These provide some space and also act like shims.
Snug these final connect down not real tight, but firm. Remember, the bowl and tank is breakable.